as well as technical advice on engines, radio setups, installations and specialty items
call me 301-785-3022
I am pleased to offer a selection of Radio Control Specialty products for the discerning modeler. Please e-mail me with your purchase order Andy Kane
My New Wire Looms are different from anything else on the market.
With a larger base for better glue adhesion. The wider base allows for
glue, screws or even double sided tape to be used for placement. A real
must have for all your building projects. Each strip comes with 4
different sized looms for placement in your aircraft.
Price: $2.00 each strip
New Air Looms are different from anything else on the market. Because of the larger
base you get much better glue adhesion. The wider bases allows for glue,
screws or even double side tape to be used for placement. A real must have for
all your building projects. Each strip comes with 2 different sized looms
for placement in your aircraft
Price: $2.00 each strip
Hysol Thixotropic glue Kit
This glue kit includes:
1-glue dispenser gun 2-tubes of Hysol 9462 Thixotropic (non-Sagging)glue 4-mixing nozzles 1-special reusable syringe for glue applications into small locations. This is the glue used by most professorial builders of high performance jets and scale aircraft. Especially designer for composite structures but this adhesive can be used on any surface.
3M HYSOL GLUE Dispenser GUN ONLY
I also offer the glue gun only should you want to keep a spare around or have one in your other workshop or trailer.
GLUE MIXER NOZZLES
The glue mixer nozzles are very handy for dispensing the Hysol glue. I have them in different size form 3 to 6 inches for gluing those hard to reach spots. You can also mix the glue on a mixing board and use like any epoxy with the mixer nozzles.
Price: $1.50 each
Special Application Syringe
This medical grade syringe can be filled with Glue and used to dispense the mixed glue to very small pieces and difficult to reach locations. The tip of the syringe is pliable so it can be bent up to 90% to further assist in special application needs. They can reuse.
Small Bulkhead Air Fill System
Here we have a small set of 1/4 turn snap fittings. They are designed for one piece to be mounted in your plane in a bulkhead, and the other is designed to connect to your air pump. Both fittings will accept your 1/16 or 2mm air line.
Heavy Duty Bulkhead Air Fill System
This is a heavy duty version of the air fill system. This system uses snap technology for the connection. The bulkhead fitting is a little larger and more robust but will still accept the 1/16 or 2mm air line. The Larger snap fitting will fit any off the shelf air compressor, schreaderwith it's 1/4 inch barbed fitting it will fit into the schreader clamp used on most air compressors.
Big Mobile Airplane Cart (Big MAC)
This Big MAC is large enough to handle a large 60 pound jet to a 1/3 or even 1/2 scale model. The Big MAC is versatile and can be configured in a number of ways to best suit your needs. From transporting that jet from the shop, to the trailer and even to the flight line, The Big MAC can do it all! In this picture, I have my CARF Models Marchetti in its cradle on the Big MAC. I can work on it in my shop, take it to the trailer and lash it down in the trailer right on the stand, and at the field it acts as an assembly cart, work bench and transport to the flight line. You will want more than one of these puppies!
Ultra Flash After Market Fuel Tanks
Main tank or wing tank
These after market fuel tanks are an exact fit in the CARF Models Flash and Ultra Flash. They come complete and ready to install. Some added features are molded in air vent line fittings and screw in main fuel cap connection. These tanks are durable and an easy refit into you're existing plane. The wing tank will hold 50 ozs and the fuse tank will hold 80 oz of fuel. Giving you just over a gallon of fuel.
Price: $165.00 each
Brand new offering Ultra Flash saddle tanks
These after market fuel tanks are an exact fit in the CARF Models Flash and Ultra Flash. They come complete and ready to install. Some added features are molded in air vent line fittings and screw in main fuel cap connection. These tanks are durable and an easy refit into you're existing plane. Each tank will hold 30 ounces of fluid giving you almost a 1/2 gallon of extra capacity.
Price : $245.00
Gas, Smoke or Jet fuel pump
Gas Fuel Pump Available in red or blue
The new Fuel
Pump features a full metal body with built in pump and attachment for the
external battery pack. The pump is ergonomically designed to be easy to secure
to Jerry Can fuel or with the addition of the handy fuel mounting plate offered
separately plate you can modify you're existing low boy Jerry can to share the
fuel pump between cans. This will remove
the need to pour over the fuel form can to can. Use with Robart smoke oil,
Kerosene, Jet-A fuel, diesel fuel or gasoline.
Requires a 3 cell lipo (battery not included)
Handy Fuel Pump Mount
The Handy Fuel
Pump Mounting plate can be used to set up your fueling system to be more efficient
and less wasteful. By simply installing
the fittings in the lid of your fuel can, you can easily move the pump assembly
and mounting plate from can to can. The
mounting plate simply hangs over the neck of the 5 gallon low boy can.
Price: $22.00 Low Boy 5 gallon can sell for 35.00
Skins 4 Jets
CARF MODELS Viper shown here.
Skins 4 Jets - the ultimate choice in high quality protection from heat and rain for your jet. The Rip stop nylon is silicone coated on both sides making it highly waterproof. It is UV proof, fast drying and extremely tear resistant. A clear heat reduction providing invaluable sun protection for your model at the airfield.
The innovative rudder cover is just one of our large selection of custom skins. It's a great way to wear and share what's on your mind.
Currently available for all CARF Model Jets and some other manufaturers as well.
Price: $339.00 including shipping anywhere in the US.